What safety factors should be considered in the design of the six degree of freedom rocking table?

When designing a six-degree-of-freedom rocking table, the following safety factors need to be considered:

Structural safety: Ensure that the structure of the six-degree-of-freedom rocking table is designed to withstand the expected loads and movements, including static and dynamic loads. Carry out structural strength and stiffness analysis to ensure that no structural failure occurs under various working conditions.

Control system security: Design a reliable control system to ensure that the motion of the six-degree-of-freedom rocking table can be accurately controlled under any circumstances. Redundant design and fault detection mechanisms are used to prevent accidents caused by control system failures.

Power system safety: Choose the right power system to ensure that the six-degree-of-freedom rocking table can run stably under various working conditions. Adopt overload protection, overheating protection and other measures to prevent accidents caused by overload or overheating of the power system.

Emergency stop mechanism: The emergency stop mechanism is designed so that the movement of the six-degree-of-freedom swing table can be quickly stopped in the event of an unexpected situation. The emergency stop button should be set in an easily accessible location and ensure that it functions reliably.

Protective devices: Set up protective devices as needed, such as protective covers, safety fences, etc., to prevent personnel from coming into contact with moving parts. Protection devices shall comply with relevant standards and regulations.

Safety signs and warnings: Obvious safety signs and warnings are set up on the six-degree-of-freedom swing table to remind personnel to pay attention to safety matters. Safety signs and warnings shall comply with relevant standards and regulations.

Maintenance and overhaul: make maintenance and overhaul plan, and regularly check and maintain the six-degree-of-freedom swing table. Ensure that all parts are in good condition and replace worn or damaged parts promptly.

Personnel training: The operator is trained to understand the operating procedures and safety precautions of the six-degree-of-freedom swing table. Ensure that the operator has sufficient knowledge and skills to operate the swing table correctly.

Emergency plans: Develop emergency plans so that measures can be taken quickly in the event of an accident. The emergency plan should include the accident handling process, rescue measures, etc., and ensure that all personnel are familiar with the emergency plan.

Compliance with standards and regulations: Ensure that the design of the 6-DOF swing table complies with relevant standards and regulations. This includes standards and regulations for structural safety, control system safety, power system safety, etc.