The servo press machine highly accurate pressing, assembly, measurement and statistical analysis functions, which can not only improve production efficiency, but also improve product quality.

Next, let's analyze what are the common servo press failures?

Fault symptoms:

The servo press device cannot be started or stops running immediately after starting.

Abnormal sounds occur when the servo press equipment is running, such as banging or friction.

Abnormal vibration or displacement occurs during the operation of the servo press equipment.

The control system of the servo press equipment has a slow response, failure or abnormal display.

Fault cause analysis Electrical fault:

Power supply problem:

If the power cables are not properly connected, the power supply may be unstable or interrupted.

Abnormal power supply voltage, too high or too low can damage electrical components.

Servo press control system failure:

Program error:

The control software of the servo press has logical errors or improper parameter Settings.

Servo press hardware failure:

Boards are aged, damaged, or components fall off.

Overheating of electrical components, such as capacitors, inductors, transistors, etc.

Communication failure:

The data transmission cable is damaged or in poor contact, which affects signal transmission.

Interface servo press fault, such as PLC, touch screen, etc.

Mechanical failure:

Servo press transmission system problems:

Gear, chain or belt wear, break, resulting in poor transmission.

Bearing damage, resulting in excessive friction and heat.

The piston or rotor is damaged, affecting the normal operation of the moving parts.

Support structure problem of servo press:

Deformation of the bed or support, possibly due to prolonged heavy loading or impact.

The fasteners are loose, resulting in inaccurate positioning of the servo press or additional vibration.